Izixhobo Zokugrumba Amatye Emigodini I-Taper Drill Button Bit 28mm-42mm7°11°
Intshayelelo yeMveliso:
Uyilo olugqibeleleyo, i-tungsten carbide, kunye nentsimbi yesiketi, amandla aphambili kunye nokungena ukuze kuveliswe imveliso eyongezelelekileyo, ukuthe tye okugqwesileyo, kunye nomgangatho wokucoca imingxunya ukuze kusebenze kakuhle ukugrumba ukuze kongiwe iindleko zepetroli.
Singayila size senze ububanzi, inani lamaqhosha kunye nemingxunya yokugungxula, imilo yamaqhosha, kunye nokuthambekela ngokweesampuli okanye imizobo yabathengi. Amaqhosha ethu enziwe nge-tungsten carbide ekumgangatho ophezulu kunye nentsimbi, acociwe ngokubandayo ukuze asetyenziswe ekubholeni amatye aqinileyo kunye nokudlulisela amandla anamandla efutheni edwaleni ngokulahleka kwamandla okuncinci. Xa kuthelekiswa namaqhekeza e-chisel athambileyo kunye namaqhekeza anqamlezileyo athambileyo, amaqhosha anetekhnoloji ephezulu, ixesha elide lokubhoboza, kunye nokusebenza kakuhle kokubhoboza. Ngokweeqhosha ezahlukeneyo, amaqhekeza eqhosha athambileyo anokwahlulwa abe luhlobo lwedome, uhlobo lwe-ballistic, njl.njl.
Iidrill ezinamaqhosha athambileyo zezona zidumileyo kwaye zifumaneka kwiindidi ezahlukeneyo zeentloko ukusuka kwi-26mm ukuya kwi-48mm. Iidrill ezinamaqhosha athambileyo ngamaqhosha e-carbide acinezelwa ngobushushu kwi-bit skirt zibonelela ngokusebenza kakuhle kokubhola kunye nobomi benkonzo egqwesileyo.
Cofa ukuze uthumele umbuzo ukuze ufumane ixabiso lamva nje lemveliso kungakapheli umzuzu omnye
Iimbonakalo:
• Izinto ezikrwada: 35CrNiMoV (i-alloy esemgangathweni ophezulu)
• Ububanzi bokubhola: 28mm～48mm
• Uqwalaselo lweqhosha: amaqhosha ama-4, amaqhosha ama-5, amaqhosha ama-6, amaqhosha asi-7, amaqhosha asi-8
• I-engile ethambileyo: 7°/11°/12°
• Iinkcukacha zombhobho wokubhola: Hex B22
• Ubude besiketi/isiketi: 50-55mm, 60-70mm, 75mm-80mm
• Ububanzi bangaphakathi besokhethi: 22/23/25mm
• Uhlobo lweqhosha: Iqhosha eliyi-ballistic/ballistic, iqhosha eliyi-spherical/iqhosha eliyi-spherical
• Umbala: luhlaza okwesibhakabhaka, obomvu, omthubi, omnyama (okanye owenzelwe wena)
• Ukupakisha: Iibhokisi zomthi ezingama-50 okanye ezili-100 okanye zeplastiki.
• Uyilo: Singayila ngokweemfuno zomthengi kunye nemizobo, kubandakanya ubungakanani beqhosha, uhlobo lweqhosha, kunye nomngxuma wokuhlamba.
• I-MOQ: Isiqwenga esi-1 sokujonga umgangatho
Iibhithi zokubhola ezidityanisiweyo zikwaziwa ngokuba ziibhithi zokubhola ezidityanisiweyo, iibhithi zokubhola izinyo zebhola, kunye neebhithi zokubhola izinyo zekholamu. Ibhithi yokubhola edityanisiweyo idityaniswe ngentambo yebhithi yokubhola kunye nentonga yokubhola edityanisiweyo ukuze kufezekiswe ukuhanjiswa kwamandla empembelelo kunye ne-torque ejikelezayo ye-rock drill, ngaloo ndlela kuqhekeka ilitye lesixhobo sokubhola ilitye. Olu hlobo lwemveliso yesixhobo sokubhola ilitye lusetyenziswa kakhulu kunye nee-hydraulic rock drilling rigs kunye nee-hydraulic rock drilling rigs. Iifom eziphambili zemisonto ziquka i-R22, R24, R30, R25, kunye neemveliso zokubhola intambo ze-R32. Zisetyenziswa kakhulu kwimigodi evulekileyo, kwimigodi engaphantsi komhlaba, ekumbeni imisele, kubunjineli bokuxhoma, ekubhombeni i-blast furnace, kubunjineli bemigudu, kubunjineli bamandla e-hydropower, ekumbeni imigodi nakwezinye iiprojekthi zokwakha.
Ipharamitha yobugcisa:
| Ububanzi | Inombolo yeqhosha | I-engile | Ubude | Ubunzima | Iphakheji | |
| mm | intshi | (iziqwenga) | (°) | (mm) | (ikg) | ibhokisi |
| 28 | 1 1/8 '' | 4 | 7°/11°/12° | 65-69 | 0.2 | 50pcs/ibhokisi |
| 30 | 1 3/16 '' | 4~6 | 7°/11°/12° | 65-69 | 0.20~0.30 | 50pcs/ibhokisi |
| 32 | 1 1/4 '' | 4~7 | 7°/11°/12° | 65-69 | 0.20~0.30 | 50pcs/ibhokisi |
| 34 | 1 11/32 '' | 4~8 | 7°/11°/12° | 65-69 | 0.22~0.30 | 50pcs/ibhokisi |
| 35 | 1 3/8 '' | 7~8 | 7°/11°/12° | 65-69 | 0.22~0.40 | 50pcs/ibhokisi |
| 36 | 1 13/32 '' | 4~8 | 7°/11°/12° | 65-69 | 0.30~0.40 | 50pcs/ibhokisi |
| 38 | 1 1/2 '' | 4~8 | 7°/11°/12° | 65-69 | 0.30~0.40 | 50pcs/ibhokisi |
| 40 | 1 9/16 '' | 4~8 | 7°/11°/12° | 65-69 | 0.30~0.42 | 50pcs/ibhokisi |
| 41 | 1 5/8 '' | 4~8 | 7°/11°/12° | 65-69 | 0.30~0.42 | 50pcs/ibhokisi |
| 42 | 1 21/32 '' | 4~8 | 7°/11°/12° | 65-69 | 0.30~0.46 | 50pcs/ibhokisi |
Idilesi
Indawo yoShishino yaseQukou, kwiNqila yaseXianghe, kwisiXeko saseLangfang, kwiPhondo laseHebei
I-imeyile
tjshenglida@gmail.com
Ifowuni
Intengiso: 18630408666
Intengiso: 13752279993
Inkxaso: 0316-8618333
Amaxesha okusebenza
NgoMvulo-ngoLwesihlanu: iiyure ezingama-24
NgoMgqibelo, ngeCawa: Ivaliwe
Singomnye wabavelisi abadumileyo be-rock drilling jack hammer eTshayina, abagxile ekuveliseni izixhobo zokubhola amatye ezinomsebenzi ogqwesileyo kunye nezixhobo ezigqwesileyo, ezenziwe ngokuhambelana nemigangatho yomgangatho wemizi-mveliso kunye ne-CE, isiqinisekiso senkqubo yolawulo lomgangatho we-ISO9001. Ezi mashini zokubhola kulula ukuzifaka, ukuzisebenzisa nokuzigcina. Ezi mashini zokubhola zixabiso elifanelekileyo kwaye kulula ukuzisebenzisa. I-rock drill yenzelwe ukuba yomelele kwaye ihlale ixesha elide, ingonakaliswa lula, kunye noluhlu olupheleleyo lwezixhobo zokubhola amatye.
Iindidi zemveliso
