Shenlina'urorin pneumaticsun fi ƙarfin masu fafatawa a fannin niƙawa na biyu saboda ƙarfin juriya, ingantaccen aikin tasiri, ƙira mai daidaitawa, da ƙarancin farashin aiki - suna samar da daidaito da ingantaccen girman manyan duwatsu/siminti inda daidaito da lokacin aiki suke da mahimmanci. 
1. Ƙarfin Gini mara Daidaitawa & Ingancin Gini
- Ƙirƙirar ƙarfe mai ƙarfe: Abubuwa masu mahimmanci (silinda, piston, chisel) suna amfani da ƙarfe mai inganci tare da ingantaccen ƙirƙira da maganin zafi, wanda ke ba da tsawon rai na 30% fiye da na yau da kullun na pneumatic picks.
- Kariyar da za a iya maye gurbinta: Yana hana lalacewa ta silinda, yana rage yawan kulawa da kuma tsawaita tsawon rai.
- Tsarin kai mai kauri: Tsarin kan baya mai ƙusoshi huɗu yana jure matsanancin tasirin lalata na biyu (dutse mai tauri, siminti mai ƙarfi) ba tare da sassautawa ba.
2. Ingantaccen Aikin Tasiri don Murkushewa na Biyu
Narkewa ta biyu tana buƙatar tasirin da ake sarrafawa akai-akai don sake girman guntu ba tare da ya karye ba (tanadi).
- Ƙarfin tasiri/mita da aka gyara: Samfura kamarTPB-60/90 da kumaG10/12 ma'auni 43–90 J tasirin kuzari da 1,250–1,800 BPM, ya dace da guntuwar da ke tare da fasawar da ke akwai.
- Ingantaccen aiki: Yana samar da raguwar kayan aiki da kashi 15-20% cikin sauri fiye da kayan aikin takwarorinsu; misali,TCA-7samfurin yana cire tan 0.5–1 a/h na babban dutse tare da ƙarancin amfani da iska (1.0 m³/min).
- Ƙarfin da ya dace: Yana ɗaukar fasahar bawul ɗin TOKU na Japan don ingantaccen iska, yana tabbatar da tasirin da ya dace koda a ƙarƙashin canjin matsin lamba na iska.
3. Tsarin Daidaitawa don Yanayi Mai Wuya da Bambanci
- Hana daskarewa da juriya ga sanyi: Samfuran jerin G suna da fasahar hana daskarewa, suna aiki da inganci a -30°C ba tare da icing ba - yana da mahimmanci don niƙawa na biyu na hunturu a ma'adanai/ma'adanai.
- Mai sauƙi da sauƙi: Hannun hana girgiza suna rage gajiyar mai aiki; samfuran suna tsakanin kilogiram 7.2–20 (misali, TCA-7 a nauyin kilogiram 7.2) don amfani da hannu ɗaya a cikin wurare masu tsauri (magudanar ruwa, kan tudu).
- Tsarin chisel mai saurin canzawa: Mai riƙewa ba tare da kayan aiki ba, wanda aka ɗora a cikin bazara yana ba da damar musanya chisel na daƙiƙa 30, yana rage lokacin aiki yayin girman guntu.
4. Rage Kuɗin Aiki da Kulawa
- Rage amfani da iska: Tsarin silinda/bawul mai kyau yana rage amfani da iska da kashi 10-15% idan aka kwatanta da na masu zaban makamancin haka, wanda hakan ke rage farashin mai/lantarki na compressor.
- Gyara mai sauƙi: Ƙananan sassa masu motsi + ginin zamani suna ba da damar gyara a wurin tare da kayan aiki na yau da kullun; sassan lalacewa masu maye gurbinsu (bushewa, hatimi) suna da ƙarancin kashi 40% idan aka kwatanta da sassan masu fafatawa.
- Babban darajar sake siyarwa: Ingantaccen gini da amincin alama suna kiyaye ƙimar ragowar kashi 60-70% bayan sa'o'i 2,000 na amfani, mafi kyau fiye da madadin gama gari.
5. Fa'idodi da aka tabbatar a fili akan masu fafatawa
| Fasali | Zaɓen Pneumatic na Shenli | Zaɓuɓɓukan Nau'i/Masu Gasar |
|---|---|---|
| Daidaitowar Tasiri | Barga a matsin iska 0.5–0.7 MPa | Canjin matsin lamba yana haifar da raguwar wutar lantarki |
| Aikin Sanyi | -30°C ikon hana daskarewa | Ƙanshin ƙasa/ƙasa a ƙasa da -5°C |
| Fitowar Kullum (Na Biyu) | 8–12 m³/h (dutse/siminti) | 6–9 m³/h |
| Tazarar Kulawa | Awanni 250 | Awa 150–200 |
Dalilin da Yasa Yake Da Muhimmanci Ga Murkushewa Na Biyu
Narkewa ta biyu tana buƙatar daidaito, gudu, da aminci don rage girman kayan zuwa girman da za a iya ɗauka (200-500 mm) ba tare da tarar da ta wuce gona da iri ba. Tsarin Shenli ya magance waɗannan buƙatu kai tsaye:
- Saurin lokacin zagaye: Tasirin mita mai yawa yana rage lokaci a kowane yanki.
- Rage sharar gida: Makamashin da aka sarrafa yana rage yawan karyawa (tarar).
- Matsakaicin lokacin aiki: Dorewa da sauƙin kulawa suna guje wa rufewa mai tsada.
Layin Ƙasa
Don murƙushewa ta biyu, Shenli pneumatic picks sun haɗa da juriya na masana'antu, aikin tasiri da aka tsara don amfani, da ƙarancin kuɗin mallaka - sun fi ƙarfin masu fafatawa a fannin yawan aiki da aminci.
Lokacin Saƙo: Mayu-08-2026
